Why You're Failing At Repairs To Upvc Windows
Why You're Failing At Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.
It is crucial to wash and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.
Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. However If windows with double panes are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.
Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash window. However, over time they are susceptible to a range of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act as soon as you discover that your uPVC windows are falling down.
To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.
If you are unable to reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are waterproof and draught-proof.
UPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the window repair handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform an initial test fit. The corner joints of the sash must align with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.
3. Water Leaks
If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.
This is an easy fix that can be completed by any DIYer who is competent. Depending on how serious the issue is, the old caulking may have to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This will make your window more difficult to clean and decrease its energy efficiency.
It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled properly here so that it drains away from the window. In more serious situations, you may have to replace the window.
Mold spots and rotted sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.
It is here also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it is more likely to click here be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and open with ease it could be hinges at the fault. Any competent DIYer can replace these in a matter of minutes.
Like any mechanical part, hinges can wear out over time. It's very simple to change a window hinge however it is easier if someone helps you hold the frame.
Make sure that the uPVC hinges open and close in the correct direction. You can check this by looking for more info the arrow on each hinge, this shows which way the window should open.
The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or by poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you advice.
It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by several different things. Firstly the hinges, again due to wear and tear could become misaligned. This can cause an opening to appear between the sash and the frame. If they're beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it may be possible to give them a clean but in certain cases, it may be necessary to get them replaced.
These seals can wear down or become damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the risk of draughts.
The final method to cut down on the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will help block out cold air and keep your home warm and cosy!
Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be cheaper to replace them rather than repair them. If you have any problems with your Upvc window you should consult an expert as soon as possible.